ANSI: SCMT32.52 UG YG3020
ISO: SCMT09T308 UG YG3020
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Carbide Insert Cvd-Ticn+Al2o3 Coated For Medium Turning Alloy & Tool Steels Ug Chip Breaker For Semi-Finishing To Medium Stable Turning. Yg3020 Is A Cvd-Ticn+Al2o3 Gold & Black Coated Grade For General Steel Turning. Sub-Micron Grain Carbide For Good Toughness And High Wear Resistance With A Special Surface Treatment On The Top Face Of The Insert For Higher Cutting Speeds, Smoother Chip Flow And Longer Insert Life. 1St Choice Grade For Versatility In General Continuous And Interrupted Machining Of Low Alloyed Steels, High Alloyed Steels And Tool Steels.
