Picture of WNMP 333 MF1 CP500 Seco WNMP060412 MF1 CP500 Trigon Negative Carbide Medium, Semi Finishing

WNMP 333 MF1 CP500 Seco WNMP060412 MF1 CP500 Trigon Negative Carbide Medium, Semi Finishing

Part Number: SECO00221

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1004546
Vendor: Sussex Tool and Supply
$17.80
This product has a minimum quantity of 10

SECO Trigon Negative Carbide Insert CP500 Grade MF1 WNMP 333 MF1 TiAIN TiN Coating. Made in Usa: No. Shipping State: MICHIGAN. Coating: TiAIN + TiN Grade: CP500.

Key Details

Materials & Finish

  • Coating: TiAIN + TiN
  • Grade: CP500

Grades & Coatings

  • Alternate Description: SECO 00000221 Trigon Insert Negative TiAIN + TiN WNMP060412 MF1 CP500 WNMP 333 MF1 CP500

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Semi finishing with negative carbide insert. Used for cutting operations on metal. Performs in medium grade CP500 conditions.

Composition

WNMP 333 MF1 CP500 Seco WNMP060412 MF1 CP500 Trigon Negative Carbide Medium.

Typical Uses

Semi finishing operations. Cutting in CP500 grade. Applied in MF1 tool geometry.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiAIN + TiN
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Insert Style WN
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Negative
Insert Size (IC) 06 "33"
Grade CP500
Insert Fits Trigon
Only registered users can write reviews