Picture of Tungaloy TTL42M-005 NS9530 Proprietary Groove Threading,Threading Insert Full Profile 3.00mm 60.0°

Tungaloy TTL42M-005 NS9530 Proprietary Groove Threading,Threading Insert Full Profile 3.00mm 60.0°

Part Number: TUN6707637

Need Assistance or Service? Please call 262-251-4020

Manufacturer: TUNGALOY
SKU: 1192078
Vendor: Sussex Tool and Supply
$37.25
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Left Hand
Insert Application General Purpose
Cutter Type Insert
Inter Or Extern Int / Ext
Insert Size (IC) 42M
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style TT
Grade NS9530
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Other
Shipping State ILLINOIS
Cutting Edge Material Carbide
Thread Teeth 1
Full or Partial Profile Full Profile
Thread Type 60.0°
Made In USA No
Insert Type Or Orientation Proprietary
Thread Pitch 3.00MM
Only registered users can write reviews