Loading category…

Solid Rounds

Sort by
Picture of 3-1/2" Diameter HSS TMX Shell End Mill, 20 Right Hand Helix, 1-1/4" Hole Diameter X 1/2" Width Of Drive Slot X 1-3/4" Length Of Cut (Loc) X 12 Flutes

3-1/2" Diameter HSS TMX Shell End Mill, 20 Right Hand Helix, 1-1/4" Hole Diameter X 1/2" Width Of Drive Slot X 1-3/4" Length Of Cut (Loc) X 12 Flutes

Part Number: TOO5-450-045
Call (262) 251-4020 for pricing
Picture of 3" Diameter HSS TMX Shell End Mill, 20 Right Hand Helix, 1-1/4" Hole Diameter X 1/2" Width Of Drive Slot X 1-3/4" Length Of Cut (Loc) X 12 Flutes

3" Diameter HSS TMX Shell End Mill, 20 Right Hand Helix, 1-1/4" Hole Diameter X 1/2" Width Of Drive Slot X 1-3/4" Length Of Cut (Loc) X 12 Flutes

Part Number: TOO5-450-040
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-035 End Mill 2.7500 69.85mm - 2-3/4 DiaFace Mill/Shell Mill 1.0000 25.40mm

Toolmex 5-450-035 End Mill 2.7500 69.85mm - 2-3/4 DiaFace Mill/Shell Mill 1.0000 25.40mm

Part Number: TOO5-450-035
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-025 End Mill 2.2500 57.15mm - 2-1/4 DiaFace Mill/Shell Mill 1.0000 25.40mm

Toolmex 5-450-025 End Mill 2.2500 57.15mm - 2-1/4 DiaFace Mill/Shell Mill 1.0000 25.40mm

Part Number: TOO5-450-025
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-020 End Mill 2.0000 50.80mm DiaFace Mill/Shell Mill 0.7500 19.05mm - 3/4

Toolmex 5-450-020 End Mill 2.0000 50.80mm DiaFace Mill/Shell Mill 0.7500 19.05mm - 3/4

Part Number: TOO5-450-020
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-015 End Mill 1.7500 44.45mm - 1-3/4 DiaFace Mill/Shell Mill 0.7500 19.05mm - 3/4

Toolmex 5-450-015 End Mill 1.7500 44.45mm - 1-3/4 DiaFace Mill/Shell Mill 0.7500 19.05mm - 3/4

Part Number: TOO5-450-015
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-010 End Mill 1.5000 38.10mm - 1-1/2 DiaFace Mill/Shell Mill 0.5000 12.70mm - 1/2

Toolmex 5-450-010 End Mill 1.5000 38.10mm - 1-1/2 DiaFace Mill/Shell Mill 0.5000 12.70mm - 1/2

Part Number: TOO5-450-010
Call (262) 251-4020 for pricing
Picture of Toolmex 5-450-005 End Mill 1.2500 31.75mm - 1-1/4 DiaFace Mill/Shell Mill 0.5000 12.70mm - 1/2

Toolmex 5-450-005 End Mill 1.2500 31.75mm - 1-1/4 DiaFace Mill/Shell Mill 0.5000 12.70mm - 1/2

Part Number: TOO5-450-005
Call (262) 251-4020 for pricing
Picture of Toolmex 5-431-075 End Mill 1.0000 25.40mm DiaCylindrical 1.0000 25.40mm

Toolmex 5-431-075 End Mill 1.0000 25.40mm DiaCylindrical 1.0000 25.40mm

Part Number: TOO5-431-075
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 7/16"" cutting dia. for 1"" DOC with 4 3/4"" shank dia. with 2 shank flats., Ejector Pilot not included."

"HSS TMX Annular Cutter, 7/16"" cutting dia. for 1"" DOC with 4 3/4"" shank dia. with 2 shank flats., Ejector Pilot not included."

Part Number: TOO5-530-110P
Call (262) 251-4020 for pricing
Picture of Toolmex 5-306-020 End Mill 0.2188 5.56mm - 7/32 DiaCylindrical 0.3750 9.53mm - 3/8

Toolmex 5-306-020 End Mill 0.2188 5.56mm - 7/32 DiaCylindrical 0.3750 9.53mm - 3/8

Part Number: TOO5-306-020
Call (262) 251-4020 for pricing
Picture of converting to Center Cutting - Part number 5-424-015 -- currently: 4 Flute Non-Center Cutting Extra Long Length TMX End Mill, HSS, 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 4-1/4" (OAL)

converting to Center Cutting - Part number 5-424-015 -- currently: 4 Flute Non-Center Cutting Extra Long Length TMX End Mill, HSS, 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 4-1/4" (OAL)

Part Number: TOO5-425-015
Call (262) 251-4020 for pricing
Loading more products…