Loading category…

Solid Rounds

Sort by
Picture of 2 Flute Solid Carbide Single End, Metric TMX End Mill; 12 mm (.4724") Dia x 12 mm shank x 25 mm Length of cut (LOC) x 75 mm (OAL)

2 Flute Solid Carbide Single End, Metric TMX End Mill; 12 mm (.4724") Dia x 12 mm shank x 25 mm Length of cut (LOC) x 75 mm (OAL)

Part Number: TOO1-180-20012
Call (262) 251-4020 for pricing
Picture of 2 Flute Solid Carbide Single End, Metric TMX End Mill; 10 mm (.3937") Dia x 10 mm shank x 22 mm Length of cut (LOC) x 75 mm (OAL)

2 Flute Solid Carbide Single End, Metric TMX End Mill; 10 mm (.3937") Dia x 10 mm shank x 22 mm Length of cut (LOC) x 75 mm (OAL)

Part Number: TOO1-180-20010
Call (262) 251-4020 for pricing
Picture of 6 Flute Solid Carbide 45 Helix TiAlN coated TMX End Mill with .025" corner radius: 1/2" Dia x 1/2" shank x 1" (LOC) x 3" (OAL)

6 Flute Solid Carbide 45 Helix TiAlN coated TMX End Mill with .025" corner radius: 1/2" Dia x 1/2" shank x 1" (LOC) x 3" (OAL)

Part Number: TOO1-170-60503
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Fine Pitch TiAlN Roughing TMX End Mill: 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Fine Pitch TiAlN Roughing TMX End Mill: 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-161-40252
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Fine Pitch Roughing TMX End Mill: 1/2" Dia x 1/2" shank x 1-1/4" (LOC) x 3" (OAL)

4 Flute Solid Carbide Fine Pitch Roughing TMX End Mill: 1/2" Dia x 1/2" shank x 1-1/4" (LOC) x 3" (OAL)

Part Number: TOO1-160-40503
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Ball Nose TiAlN coated Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Ball Nose TiAlN coated Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-104-4025
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with .025"-.030" corner radius: 1/2" Dia x 1/2" shank x 1-1/4" (LOC) x 3" (OAL)

4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with .025"-.030" corner radius: 1/2" Dia x 1/2" shank x 1-1/4" (LOC) x 3" (OAL)

Part Number: TOO1-150-40503
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with .025"-.030" corner radius: 1/2" Dia x 1/2" shank x 5/8" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with .025"-.030" corner radius: 1/2" Dia x 1/2" shank x 5/8" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-150-405025
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with Sharp Corners: 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Variable Helix Pereformance TiAlN coated TMX End Mill with Sharp Corners: 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-150-402525S
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Double End, TMX End Mill 3/8" Dia x 3/8" shank x 1/2" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Double End, TMX End Mill 3/8" Dia x 3/8" shank x 1/2" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-124-4038
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Double End, TMX End Mill 1/8" Dia x 1/8" shank x 1/4" (LOC) x 1-1/2" (OAL)

4 Flute Solid Carbide Double End, TMX End Mill 1/8" Dia x 1/8" shank x 1/4" (LOC) x 1-1/2" (OAL)

Part Number: TOO1-124-4012
Call (262) 251-4020 for pricing
Picture of 4 Flute Solid Carbide Ball Nose Long TiAlN coated Single End, TMX End Mill; 1/2" Dia x 1/2" shank x 2" (LOC) x 4" (OAL)

4 Flute Solid Carbide Ball Nose Long TiAlN coated Single End, TMX End Mill; 1/2" Dia x 1/2" shank x 2" (LOC) x 4" (OAL)

Part Number: TOO1-113-40502
Call (262) 251-4020 for pricing
Loading more products…