Loading category…

Hole Making

Sort by
Picture of HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 19/32", Cutting diameter, 8 Flutes: 2" flute length x 8" overall length (OAL)

HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 19/32", Cutting diameter, 8 Flutes: 2" flute length x 8" overall length (OAL)

Part Number: TOO5-015-155
Call (262) 251-4020 for pricing
Picture of HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 39/64", Cutting diameter, 8 Flutes: 2-1/4" flute length x 9" overall length (OAL)

HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 39/64", Cutting diameter, 8 Flutes: 2-1/4" flute length x 9" overall length (OAL)

Part Number: TOO5-015-160
Call (262) 251-4020 for pricing
Picture of HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 3/4" major diameter with 15/32" approx diameter at point x 7-3/8" flute length x 12" overall length (OAL) with # 3 MT shank

HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 3/4" major diameter with 15/32" approx diameter at point x 7-3/8" flute length x 12" overall length (OAL) with # 3 MT shank

Part Number: TOO5-050-030
Call (262) 251-4020 for pricing
Picture of HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 11/16" major diameter with 13/32" approx diameter at point x 7-1/8" flute length x 11-3/4" overall length (OAL) with # 3 MT shank

HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 11/16" major diameter with 13/32" approx diameter at point x 7-1/8" flute length x 11-3/4" overall length (OAL) with # 3 MT shank

Part Number: TOO5-050-025
Call (262) 251-4020 for pricing
Picture of HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 5/8" major diameter with 25/64" approx diameter at point x 6-1/8" flute length x 10" overall length (OAL) with # 2 MT shank

HSS Taper Shank Left Hand 7-9 degree Helix, Right Hand Cut TMX Bridge Reamer, 5 Flutes, 5/8" major diameter with 25/64" approx diameter at point x 6-1/8" flute length x 10" overall length (OAL) with # 2 MT shank

Part Number: TOO5-050-020
Call (262) 251-4020 for pricing
Picture of HSS Straight Flute Right Hand Cut (RHC) Straight Shank 45 Chamfer TMX Chucking Reamer Decimal Size .5615", 8 Flutes: 2" flute length x 8" overall length (OAL)

HSS Straight Flute Right Hand Cut (RHC) Straight Shank 45 Chamfer TMX Chucking Reamer Decimal Size .5615", 8 Flutes: 2" flute length x 8" overall length (OAL)

Part Number: TOO5-018-5615
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 2-1/4"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 2-1/4"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-189P
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 2-3/8"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 2-3/8"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-192P
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 2-1/2"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 2-1/2"" cutting dia. for 1"" DOC with 12 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-195P
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 1/2"" cutting dia. for 2"" DOC with 4 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 1/2"" cutting dia. for 2"" DOC with 4 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-211P
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 7/16"" cutting dia. for 2"" DOC with 4 flutes x 3/4"" shank dia. with 2 shank flats., Ejector Pilot not included."

"HSS TMX Annular Cutter, 7/16"" cutting dia. for 2"" DOC with 4 flutes x 3/4"" shank dia. with 2 shank flats., Ejector Pilot not included."

Part Number: TOO5-530-210P
Call (262) 251-4020 for pricing
Picture of "HSS TMX Annular Cutter, 5/8"" cutting dia. for 2"" DOC with 5 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 5/8"" cutting dia. for 2"" DOC with 5 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-216P
Call (262) 251-4020 for pricing
Loading more products…