Sussex Tool and Supply. 80.0°

Filter by attributes

Corner Radius

Select Any Corner Radius ▼

0.0070 0.18MM

0.0160 0.41MM

0.0310 0.79MM

0.0320 0.81MM

0.0470 1.19MM

Cutter Type

Select Any Cutter Type ▼

Boring Head Insert

Cutting Edge Definition

Select Any Cutting Edge Definition ▼

as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC)

Cemented carbides are a class of hard materials used extensively for cutting tools

or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.

PCD stands for “Poly Crystalline Diamond”

the hardest available cutting material. PCD is a synthetic diamond produced by sintering together selected diamond particles with a metal matrix at high temperature and high pressure. The result is 90-95% diamond content material that reaches a hardness close to 6000 HV. In addition

the small amount of the binder gives the material additional toughness that makes it an efficient cutting material.

titanium carbide (TiC)

Cutting Edge Material

Select Any Cutting Edge Material ▼

Carbide

PCD

Insert Application

Select Any Insert Application ▼

Finishing

General Purpose

Insert Or Tool

Select Any Insert Or Tool ▼