TOOLMEX

Sort by
Picture of 45 Cobalt TMX Dovetail Cutter with Weldon Shank, 1-7/8" diameter x 9/16" Wide x 7/8" shank x 3-1/4" OAL 12 flutes

45 Cobalt TMX Dovetail Cutter with Weldon Shank, 1-7/8" diameter x 9/16" Wide x 7/8" shank x 3-1/4" OAL 12 flutes

Part Number: TOO5-722-020
$316.71
Picture of Toolmex 8-330-430Q NMTB40 Drill Chuck

Toolmex 8-330-430Q NMTB40 Drill Chuck

Part Number: TOO8-330-430Q
$316.43
Picture of Toolmex 8-302-5100 NMTB50 Collet Chuck G100

Toolmex 8-302-5100 NMTB50 Collet Chuck G100

Part Number: TOO8-302-5100
$316.14
Picture of APX-D1.250-W1.25-9.9-3-16. 1-1/4 Inch 3 Flute 9.9 Long 90 Weldon Shank End Mill for AP_T 16 Inserts

APX-D1.250-W1.25-9.9-3-16. 1-1/4 Inch 3 Flute 9.9 Long 90 Weldon Shank End Mill for AP_T 16 Inserts

Part Number: TOO6-116-1203B
$316.06
Picture of Toolmex 5-750-7693 1-3/4" - 16 H4 Plug Chamfer Threading tapping

Toolmex 5-750-7693 1-3/4" - 16 H4 Plug Chamfer Threading tapping

Part Number: TOO5-750-7693
$315.29
Picture of HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 1-7/8", Cutting diameter, 12 Flutes: 4" flute length x 14" overall length (OAL)

HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 1-7/8", Cutting diameter, 12 Flutes: 4" flute length x 14" overall length (OAL)

Part Number: TOO5-015-365
$314.04
Picture of 2 Inch Cutting Dia. End Mill, 90 Cut, with R-8 Shank, 3 Flute, Use Insert 112-0766-P3 for Steel Applications

2 Inch Cutting Dia. End Mill, 90 Cut, with R-8 Shank, 3 Flute, Use Insert 112-0766-P3 for Steel Applications

Part Number: TOO6-901-530
$312.83
Picture of Toolmex 5-750-1130 1-5/8" - 8 H4 Plug Chamfer Threading tapping

Toolmex 5-750-1130 1-5/8" - 8 H4 Plug Chamfer Threading tapping

Part Number: TOO5-750-1130
$312.59
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-25/32" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-25/32" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-168-172
$312.59
Picture of Toolmex 5-750-1129 1-5/8" - 8 H4 Taper Chamfer Threading tapping

Toolmex 5-750-1129 1-5/8" - 8 H4 Taper Chamfer Threading tapping

Part Number: TOO5-750-1129
$312.59
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-27/32" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-27/32" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-168-180
$312.59
Picture of TMX Hard Solid ID Jaws for 6in 3-Jaw TMX Scroll Chuck 3 Piece Set TMX

TMX Hard Solid ID Jaws for 6in 3-Jaw TMX Scroll Chuck 3 Piece Set TMX

Part Number: TOO3-881-306P
$312.21
Loading more products…