TOOLMEX

Sort by
Picture of HSS 120 point angle TMX NC Spotting Drill, 5/8" diameter x 1-5/8" flute length x 4-3/8" overall length (OAL)

HSS 120 point angle TMX NC Spotting Drill, 5/8" diameter x 1-5/8" flute length x 4-3/8" overall length (OAL)

Part Number: TOO5-165-1254
$40.91
Picture of Toolmex 5-220-050 End Mill 0.6250 15.88mm - 5/8 DiaCylindrical 0.6250 15.88mm - 5/8

Toolmex 5-220-050 End Mill 0.6250 15.88mm - 5/8 DiaCylindrical 0.6250 15.88mm - 5/8

Part Number: TOO5-220-050
$40.91
Picture of HSS 90 point angle TMX NC Spotting Drill, 5/8" diameter x 1-5/8" flute length x 4-3/8" overall length (OAL)

HSS 90 point angle TMX NC Spotting Drill, 5/8" diameter x 1-5/8" flute length x 4-3/8" overall length (OAL)

Part Number: TOO5-165-0954
$40.91
Picture of Toolmex 8-530-0005 Collet R8 Jacobs Taper 6

Toolmex 8-530-0005 Collet R8 Jacobs Taper 6

Part Number: TOO8-530-0005
$40.86
Picture of Toolmex 8-800-P825 Collet ER25 Nut

Toolmex 8-800-P825 Collet ER25 Nut

Part Number: TOO8-800-P825
$40.86
Picture of Toolmex 8-530-0002 Collet R8 Jacobs Taper 2

Toolmex 8-530-0002 Collet R8 Jacobs Taper 2

Part Number: TOO8-530-0002
$40.86
Picture of Toolmex 8-530-0001 Collet R8 Jacobs Taper 1

Toolmex 8-530-0001 Collet R8 Jacobs Taper 1

Part Number: TOO8-530-0001
$40.86
Picture of HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer DIN212 12.5mm, 8 Flutes: 44 mm flute length x 151 mm overall length (OAL)

HSS Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer DIN212 12.5mm, 8 Flutes: 44 mm flute length x 151 mm overall length (OAL)

Part Number: TOO5-019-102
$40.77
Picture of HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank, 5/16" cutting diameter, 6 Flutes: 2-1/4" flute length x 4-1/2" overall length (OAL)

HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank, 5/16" cutting diameter, 6 Flutes: 2-1/4" flute length x 4-1/2" overall length (OAL)

Part Number: TOO5-010-035
$40.77
Picture of Toolmex 5-307-319 End Mill 0.7480 19.00mm DiaCylindrical 0.7500 19.05mm - 3/4

Toolmex 5-307-319 End Mill 0.7480 19.00mm DiaCylindrical 0.7500 19.05mm - 3/4

Part Number: TOO5-307-319
$40.77
Picture of 4 Flute Solid Carbide Ball Nose Long TiAlN coated Single End, TMX End Mill; 1/8" Dia x 1/8" shank x 1" (LOC) x 3" (OAL)

4 Flute Solid Carbide Ball Nose Long TiAlN coated Single End, TMX End Mill; 1/8" Dia x 1/8" shank x 1" (LOC) x 3" (OAL)

Part Number: TOO1-113-40123
$40.69
Picture of Toolmex 6-085-016 Ar-16 1In Right Hand Carbidetipped Square Shank Turning Tool Bit. Grade C5/P30

Toolmex 6-085-016 Ar-16 1In Right Hand Carbidetipped Square Shank Turning Tool Bit. Grade C5/P30

Part Number: TOO6-085-016
$40.64
Loading more products…