TOOLMEX

Sort by
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 21/32" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 21/32" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-166-028
$44.27
Picture of HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #204, 1/2" diameter x 1/16" Face width x 1/2" shank x 2-1/16" (OAL)

HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #204, 1/2" diameter x 1/16" Face width x 1/2" shank x 2-1/16" (OAL)

Part Number: TOO5-728-005
$44.27
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 41/64" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 41/64" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-166-026
$44.27
Picture of Toolmex 5-750-6334 3/4" - 27 H3 Plug Chamfer Threading tapping

Toolmex 5-750-6334 3/4" - 27 H3 Plug Chamfer Threading tapping

Part Number: TOO5-750-6334
$44.27
Picture of 4 Flute Solid Carbide Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 3/4" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-100-4025
$44.19
Picture of 4 Flute Solid Carbide Ball Nose Single End, Metric TMX End Mill; 8 mm (.3150") Dia x 8 mm shank x 20 mm Length of cut (LOC) x 63 mm (OAL)

4 Flute Solid Carbide Ball Nose Single End, Metric TMX End Mill; 8 mm (.3150") Dia x 8 mm shank x 20 mm Length of cut (LOC) x 63 mm (OAL)

Part Number: TOO1-181-4008
$44.19
Picture of Cobalt Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 13/32" cutting diameter, 6 Flutes: 1-3/4" flute length x 7" overall length (OAL)

Cobalt Straight Flute RHC Straight shank 45 deg Chamfer TMX Chucking Reamer, 13/32" cutting diameter, 6 Flutes: 1-3/4" flute length x 7" overall length (OAL)

Part Number: TOO5-022-095
$44.09
Picture of Toolmex 5-307-422 End Mill 0.8661 22.00mm DiaCylindrical 0.8750 22.23mm - 7/8

Toolmex 5-307-422 End Mill 0.8661 22.00mm DiaCylindrical 0.8750 22.23mm - 7/8

Part Number: TOO5-307-422
$44.09
Picture of HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank - DIn 206/B, 10mm cutting diameter, 6 Flutes: 66 mm flute length x 133 mm overall length (OAL)

HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank - DIn 206/B, 10mm cutting diameter, 6 Flutes: 66 mm flute length x 133 mm overall length (OAL)

Part Number: TOO5-011-060
$44.09
Picture of Toolmex 8-800-P832 Collet ER32 Nut

Toolmex 8-800-P832 Collet ER32 Nut

Part Number: TOO8-800-P832
$44.09
Picture of Toolmex 5-302-124 End Mill 0.9449 24.00mm DiaCylindrical 0.5000 12.70mm - 1/2

Toolmex 5-302-124 End Mill 0.9449 24.00mm DiaCylindrical 0.5000 12.70mm - 1/2

Part Number: TOO5-302-124
$44.09
Picture of 4 Flute Center Cutting Regular Length TMX End Mill, HSS, 20 mm cutting diameter x 3/4" shank diameter x 1-7/8" length of cut (LOC) x 4-1/8" overall length (OAL)

4 Flute Center Cutting Regular Length TMX End Mill, HSS, 20 mm cutting diameter x 3/4" shank diameter x 1-7/8" length of cut (LOC) x 4-1/8" overall length (OAL)

Part Number: TOO5-307-320
$44.09
Loading more products…