TOOLMEX

Sort by
Picture of Toolmex 8-750-432 8-750-432 Retention Knob BT50

Toolmex 8-750-432 8-750-432 Retention Knob BT50

Part Number: TOO8-750-432
$37.31
Picture of Toolmex 8-750-038 8-750-038 Retention Knob CAT50

Toolmex 8-750-038 8-750-038 Retention Knob CAT50

Part Number: TOO8-750-038
$37.31
Picture of 4 Flute Solid Carbide Long Single End, TMX End Mill; 1/8" Dia x 1/8" shank x 1-1/8" (LOC) x 4" (OAL)

4 Flute Solid Carbide Long Single End, TMX End Mill; 1/8" Dia x 1/8" shank x 1-1/8" (LOC) x 4" (OAL)

Part Number: TOO1-110-40124
$37.22
Picture of 4 Flute Solid Carbide Single End, TMX End Mill; 3/8" cutting diamter x 3/8" shank x 1" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Single End, TMX End Mill; 3/8" cutting diamter x 3/8" shank x 1" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-100-4038
$37.22
Picture of 6.00 mm (.2362) Solid Carbide TMX Jobber Drill 118 Point, 50 mm flute length x 82 mm overall length (OAL)

6.00 mm (.2362) Solid Carbide TMX Jobber Drill 118 Point, 50 mm flute length x 82 mm overall length (OAL)

Part Number: TOO1-200-0236
$37.22
Picture of 4 Flute Solid Carbide Ball Nose Single End, TMX End Mill; 5/16" Dia x 5/16" shank x 13/16" (LOC) x 2-1/2" (OAL)

4 Flute Solid Carbide Ball Nose Single End, TMX End Mill; 5/16" Dia x 5/16" shank x 13/16" (LOC) x 2-1/2" (OAL)

Part Number: TOO1-103-4031
$37.22
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 21/32" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 21/32" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-166-028
$37.19
Picture of Toolmex 5-750-6334 3/4" - 27 H3 Plug Chamfer Threading Taping

Toolmex 5-750-6334 3/4" - 27 H3 Plug Chamfer Threading Taping

Part Number: TOO5-750-6334
$37.19
Picture of HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #204, 1/2" diameter x 1/16" Face width x 1/2" shank x 2-1/16" (OAL)

HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #204, 1/2" diameter x 1/16" Face width x 1/2" shank x 2-1/16" (OAL)

Part Number: TOO5-728-005
$37.19
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 17.0 mm (.6693") cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 17.0 mm (.6693") cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-167-170
$37.19
Picture of HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #404, 1/2" diameter x 1/8" Face width x 1/2" shank x 2-1/8" (OAL)

HSS TMX Staggered Tooth, Woodruff Keyseat Cutter, #404, 1/2" diameter x 1/8" Face width x 1/2" shank x 2-1/8" (OAL)

Part Number: TOO5-728-020
$37.19
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 11/16" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 11/16" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-166-032
$37.19