TOOLMEX

Sort by
Picture of HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank, 5/8" cutting diameter, 8 Flutes: 3-1/2" flute length x 7" overall length (OAL)

HSS TMX Hand Reamer, Left hand helical flute, Right hand cut, Straight shank, 5/8" cutting diameter, 8 Flutes: 3-1/2" flute length x 7" overall length (OAL)

Part Number: TOO5-010-085
$71.63
Picture of Toolmex 5-301-145 End Mill 1.0000 25.40mm DiaCylindrical 0.6250 15.88mm - 5/8

Toolmex 5-301-145 End Mill 1.0000 25.40mm DiaCylindrical 0.6250 15.88mm - 5/8

Part Number: TOO5-301-145
$71.59
Picture of 60 HSS TMX Single Angle Chamfering Cutter, 3/4" diameter x 5/16" Cutter width x 2-1/8" x 3/8 Shank

60 HSS TMX Single Angle Chamfering Cutter, 3/4" diameter x 5/16" Cutter width x 2-1/8" x 3/8 Shank

Part Number: TOO5-680-006
$71.44
Picture of HSS TMX Plain Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 1" hole size x 16 Teeth

HSS TMX Plain Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 1" hole size x 16 Teeth

Part Number: TOO5-706-065
$71.44
Picture of HSS TMX Staggered Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 7/8" hole size x 16 Teeth

HSS TMX Staggered Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 7/8" hole size x 16 Teeth

Part Number: TOO5-709-010
$71.44
Picture of "HSS TMX Annular Cutter, 1-1/8"" cutting dia. for 1"" DOC with 8 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 1-1/8"" cutting dia. for 1"" DOC with 8 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-139P
$71.44
Picture of # 10 HSS 60 TMX Combined Drill & Countersink Plain Type - Right Hand - 1" body Dia x 3/8" drill Dia x 3/8" drill length x 3-3/4" OAL

# 10 HSS 60 TMX Combined Drill & Countersink Plain Type - Right Hand - 1" body Dia x 3/8" drill Dia x 3/8" drill length x 3-3/4" OAL

Part Number: TOO5-600-055
$71.44
Picture of HSS TMX Plain Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 7/8" hole size x 16 Teeth

HSS TMX Plain Tooth Side Milling Cutter, 2-1/2" diameter x 1/4" Face width x 7/8" hole size x 16 Teeth

Part Number: TOO5-706-040
$71.44
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-168-072
$71.10
Picture of HSS TMX Straight Tooth, Woodruff Keyseat Cutter, #1010, 1-1/4" diameter x 5/16" Face width x 1/2" shank x 2-5/16" (OAL)

HSS TMX Straight Tooth, Woodruff Keyseat Cutter, #1010, 1-1/4" diameter x 5/16" Face width x 1/2" shank x 2-5/16" (OAL)

Part Number: TOO5-727-150
$71.10
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 25.5 mm (1.0039") cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 25.5 mm (1.0039") cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-167-255
$71.10
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 25.0 mm (.9843") cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 25.0 mm (.9843") cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-167-250
$71.10
Loading more products…