TOOLMEX

Sort by
Picture of HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-3/8" diameter x 3/4" hole diameter x 3" Overall Length (OAL)

HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-3/8" diameter x 3/4" hole diameter x 3" Overall Length (OAL)

Part Number: TOO5-155-055
$88.29
Picture of Toolmex 5-550-057 Corner Rounder 1.2500 31.75mm - 1-1/4 DiaCylindrical 0.7500 19.05mm - 3/4 0.3750 9.53mm Radius

Toolmex 5-550-057 Corner Rounder 1.2500 31.75mm - 1-1/4 DiaCylindrical 0.7500 19.05mm - 3/4 0.3750 9.53mm Radius

Part Number: TOO5-550-057
$88.29
Picture of HSS TMX Staggered Tooth Side Milling Cutter, 4" diameter x 3/16" Face width x 1" hole size x 18 Teeth

HSS TMX Staggered Tooth Side Milling Cutter, 4" diameter x 3/16" Face width x 1" hole size x 18 Teeth

Part Number: TOO5-709-205
$88.29
Picture of HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-1/4" diameter x 5/8" hole diameter x 2-3/4" Overall Length (OAL)

HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-1/4" diameter x 5/8" hole diameter x 2-3/4" Overall Length (OAL)

Part Number: TOO5-155-045
$88.29
Picture of "HSS TMX Annular Cutter, 7/8"" cutting dia. for 3"" DOC with 6 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 7/8"" cutting dia. for 3"" DOC with 6 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-327P
$88.29
Picture of 1/2 Inch Cutting Dia. End Mill, 90 Cut, with .500 Weldon Shank, 1 Flute, Use Insert 112-0762-P3 for Steel Applications

1/2 Inch Cutting Dia. End Mill, 90 Cut, with .500 Weldon Shank, 1 Flute, Use Insert 112-0762-P3 for Steel Applications

Part Number: TOO6-901-002
$88.12
Picture of HSS TMX Taper Shank General Purpose Drills, 118 Point, Black Oxide, 27/32" diameter x 6-1/8" flute length x 10" overall length (OAL) with # 2 Morse Taper shank

HSS TMX Taper Shank General Purpose Drills, 118 Point, Black Oxide, 27/32" diameter x 6-1/8" flute length x 10" overall length (OAL) with # 2 Morse Taper shank

Part Number: TOO5-190-250
$87.90
Picture of HSS TMX Taper Shank, General Purpose Drills 118 Point, Black Oxide 23.0 mm diameter x 155 mm flute length x 276 mm overall length (OAL) with # 3 Morse Taper shank

HSS TMX Taper Shank, General Purpose Drills 118 Point, Black Oxide 23.0 mm diameter x 155 mm flute length x 276 mm overall length (OAL) with # 3 Morse Taper shank

Part Number: TOO5-191-248
$87.90
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-1/4" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 3/4" Shank, General Purpose with 118 point, 1-1/4" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-168-104
$87.90
Picture of HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 1-1/4" cutting diameter x 3" flute length x 6" overall length (OAL)

HSS TMX Reduced Shank Silver and Deming Drill with 1/2" Shank, General Purpose with 118 point, 1-1/4" cutting diameter x 3" flute length x 6" overall length (OAL)

Part Number: TOO5-166-104
$87.90
Picture of Toolmex 5-304-295 End Mill 1.2500 31.75mm - 1-1/4 DiaCylindrical 1.2500 31.75mm - 1-1/4

Toolmex 5-304-295 End Mill 1.2500 31.75mm - 1-1/4 DiaCylindrical 1.2500 31.75mm - 1-1/4

Part Number: TOO5-304-295
$87.72
Picture of Gtn Cut-Off And Grooving Blade Toolmex 6-895-264 Cut Off Blade

Gtn Cut-Off And Grooving Blade Toolmex 6-895-264 Cut Off Blade

Part Number: TOO6-895-264
$87.60