TOOLMEX

Sort by
Picture of .75 Inch Cutting Dia. End Mill, 90 Cut, with .750 Weldon Shank, 2 Flutes, Use Insert 112-0762-P3 for Steel Applications

.75 Inch Cutting Dia. End Mill, 90 Cut, with .750 Weldon Shank, 2 Flutes, Use Insert 112-0762-P3 for Steel Applications

Part Number: TOO6-901-005
$116.36
Picture of Toolmex 3-220-6812 3-220-6812 Work Holding Vices

Toolmex 3-220-6812 3-220-6812 Work Holding Vices

Part Number: TOO3-220-6812
$116.27
Picture of 3-862-860P Collet Wrench For 16C Collet Chuck, TMX

3-862-860P Collet Wrench For 16C Collet Chuck, TMX

Part Number: TOO3-862-860P
$116.27
Picture of 4 Flute Solid Carbide Extra-Long Single End, TMX End Mill; 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 6" (OAL)

4 Flute Solid Carbide Extra-Long Single End, TMX End Mill; 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 6" (OAL)

Part Number: TOO1-110-40377
$116.26
Picture of Msdnn Style, Neutral Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 45 Lead For Snxx 43X Inserts

Msdnn Style, Neutral Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 45 Lead For Snxx 43X Inserts

Part Number: TOO6-734-412
$116.10
Picture of MCMNN Style, Neutral Hand, 1 Inch Square Shank ToolHolder, 6.00 Inch Oal, With 40 Lead For Cnxx 43X Inserts

MCMNN Style, Neutral Hand, 1 Inch Square Shank ToolHolder, 6.00 Inch Oal, With 40 Lead For Cnxx 43X Inserts

Part Number: TOO6-711-016
$116.10
Picture of Gtn Cut-Off And Grooving Blade Toolmex 6-895-324 Cut Off Blade

Gtn Cut-Off And Grooving Blade Toolmex 6-895-324 Cut Off Blade

Part Number: TOO6-895-324
$116.10
Picture of MSRNR Style, Right Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 15 Lead For Snxx 43X Inserts

MSRNR Style, Right Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 15 Lead For Snxx 43X Inserts

Part Number: TOO6-736-124R
$116.10
Picture of "HSS TMX Annular Cutter, 1-7/16"" cutting dia. for 2"" DOC with 10 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 1-7/16"" cutting dia. for 2"" DOC with 10 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-254P
$116.10
Picture of Toolmex 5-550-055 Corner Rounder 1.2500 31.75mm - 1-1/4 DiaCylindrical 0.5000 12.70mm - 1/2 0.3750 9.53mm Radius

Toolmex 5-550-055 Corner Rounder 1.2500 31.75mm - 1-1/4 DiaCylindrical 0.5000 12.70mm - 1/2 0.3750 9.53mm Radius

Part Number: TOO5-550-055
$115.70
Picture of Toolmex 8-110-4070P CAT40 End Mill 0.3125 7.94mm - 5/16 2.5000 Gauge Length

Toolmex 8-110-4070P CAT40 End Mill 0.3125 7.94mm - 5/16 2.5000 Gauge Length

Part Number: TOO8-110-4070P
$115.66
Picture of Toolmex 8-502-1106 Collet Chuck R11 0.6250 15.88mm - 5/8 Shank

Toolmex 8-502-1106 Collet Chuck R11 0.6250 15.88mm - 5/8 Shank

Part Number: TOO8-502-1106
$115.66
Loading more products…