TOOLMEX

Sort by
Picture of HSS TMX Hand Reamer, Straight flute, Straight shank, 1-1/16" cutting diameter, 10 Flutes: 5-5/8" flute length x 11-1/4" overall length (OAL)

HSS TMX Hand Reamer, Straight flute, Straight shank, 1-1/16" cutting diameter, 10 Flutes: 5-5/8" flute length x 11-1/4" overall length (OAL)

Part Number: TOO5-005-150
$97.67
Picture of 4 Flute Solid Carbide Extra-Long Single End, TMX End Mill; 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 6" (OAL)

4 Flute Solid Carbide Extra-Long Single End, TMX End Mill; 3/8" Dia x 3/8" shank x 2-1/2" (LOC) x 6" (OAL)

Part Number: TOO1-110-40377
$97.67
Picture of 4 Flute Solid Carbide Ball Nose Extra-Long Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 1-1/2" (LOC) x 6" (OAL)

4 Flute Solid Carbide Ball Nose Extra-Long Single End, TMX End Mill; 1/4" Dia x 1/4" shank x 1-1/2" (LOC) x 6" (OAL)

Part Number: TOO1-111-40256
$97.67
Picture of "HSS TMX Annular Cutter, 15/16"" cutting dia. for 3"" DOC with 6 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 15/16"" cutting dia. for 3"" DOC with 6 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-330P
$97.67
Picture of "HSS TMX Annular Cutter, 1-7/16"" cutting dia. for 2"" DOC with 10 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

"HSS TMX Annular Cutter, 1-7/16"" cutting dia. for 2"" DOC with 10 flutes x 3/4"" shank dia. with 2 shank flats, Ejector Pilot not included."

Part Number: TOO5-530-254P
$97.53
Picture of MCMNN Style, Neutral Hand, 1 Inch Square Shank ToolHolder, 6.00 Inch Oal, With 40 Lead For Cnxx 43X Inserts

MCMNN Style, Neutral Hand, 1 Inch Square Shank ToolHolder, 6.00 Inch Oal, With 40 Lead For Cnxx 43X Inserts

Part Number: TOO6-711-016
$97.53
Picture of Gtn Cut-Off And Grooving Blade Toolmex 6-895-324 Cut Off Blade

Gtn Cut-Off And Grooving Blade Toolmex 6-895-324 Cut Off Blade

Part Number: TOO6-895-324
$97.53
Picture of Msdnn Style, Neutral Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 45 Lead For Snxx 43X Inserts

Msdnn Style, Neutral Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 45 Lead For Snxx 43X Inserts

Part Number: TOO6-734-412
$97.53
Picture of Taper Shank Straight Flute TMX Chucking Reamer, Metric - DIn 208, 28 mm cutting diameter x 71 mm flute length x 277 mm overall length(OAL), #3 MT shank, 10 Flute

Taper Shank Straight Flute TMX Chucking Reamer, Metric - DIn 208, 28 mm cutting diameter x 71 mm flute length x 277 mm overall length(OAL), #3 MT shank, 10 Flute

Part Number: TOO5-026-120
$97.53
Picture of MSRNR Style, Right Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 15 Lead For Snxx 43X Inserts

MSRNR Style, Right Hand, 3/4 Inch Square Shank ToolHolder, 4.50 Inch Oal, With 15 Lead For Snxx 43X Inserts

Part Number: TOO6-736-124R
$97.53
Picture of Toolmex 8-110-4070P CAT40 End Mill 0.3125 7.94mm - 5/16 2.5000 Gauge Length

Toolmex 8-110-4070P CAT40 End Mill 0.3125 7.94mm - 5/16 2.5000 Gauge Length

Part Number: TOO8-110-4070P
$97.17
Picture of Toolmex 8-310-045Q NMTB40 End Mill 0.6250 15.88mm - 5/8

Toolmex 8-310-045Q NMTB40 End Mill 0.6250 15.88mm - 5/8

Part Number: TOO8-310-045Q
$97.17