TOOLMEX

Sort by
Picture of Toolmex 8-100-4080P CAT40 Collet Chuck ER32 6.0000 Gauge Length

Toolmex 8-100-4080P CAT40 Collet Chuck ER32 6.0000 Gauge Length

Part Number: TOO8-100-4080P
$188.13
Picture of APX-D.625-W.625-3.9-2-10

APX-D.625-W.625-3.9-2-10

Part Number: TOO6-110-0602
$188.13
Picture of 90 HSS TMX Double Angle Cutter, 3" diameter x 5/8" Face width x 1" hole size x 22 teeth

90 HSS TMX Double Angle Cutter, 3" diameter x 5/8" Face width x 1" hole size x 22 teeth

Part Number: TOO5-718-030
$188.11
Picture of HSS TMX Convex Radius Shank Cutter, 5/16" Radius x 1-5/8" diameter x 4" x 3/4" Shank 6 flutes

HSS TMX Convex Radius Shank Cutter, 5/16" Radius x 1-5/8" diameter x 4" x 3/4" Shank 6 flutes

Part Number: TOO5-690-040
$188.11
Picture of Toolmex 8-120-4040P CAT40 Shell Mill 1.0000 25.40mm 6.0000 Gauge Length

Toolmex 8-120-4040P CAT40 Shell Mill 1.0000 25.40mm 6.0000 Gauge Length

Part Number: TOO8-120-4040P
$187.67
Picture of Si-Mdunl Style, Left Hand, 1 1/2 Inch Dia. Boring Bar With -3 Lead For Dnxx 43X Inserts

Si-Mdunl Style, Left Hand, 1 1/2 Inch Dia. Boring Bar With -3 Lead For Dnxx 43X Inserts

Part Number: TOO6-770-124L
$187.06
Picture of Si-Mdunr Style, Right Hand, 1 1/2 Inch Dia. Boring Bar With -3 Lead For Dnxx 43X Inserts

Si-Mdunr Style, Right Hand, 1 1/2 Inch Dia. Boring Bar With -3 Lead For Dnxx 43X Inserts

Part Number: TOO6-770-124R
$187.06
Picture of Toolmex 8-136-5003 CAT50 Morse Taper 3

Toolmex 8-136-5003 CAT50 Morse Taper 3

Part Number: TOO8-136-5003
$187.06
Picture of Toolmex 5-450-030 End Mill 2.5000 63.50mm - 2-1/2 DiaFace Mill/Shell Mill 1.0000 25.40mm

Toolmex 5-450-030 End Mill 2.5000 63.50mm - 2-1/2 DiaFace Mill/Shell Mill 1.0000 25.40mm

Part Number: TOO5-450-030
$186.94
Picture of HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-15/16" diameter x 1" hole diameter x 3-1/2" Overall Length (OAL)

HSS (M2) TMX Shell Reamer 10 degree Left Hand Helix Flute, Right Hand Cut, 1-15/16" diameter x 1" hole diameter x 3-1/2" Overall Length (OAL)

Part Number: TOO5-155-100
$186.94
Picture of Toolmex 3-546-005P Dead Center With Nut Carbide Tipped Mt5 T.I.R. 0.0002In, TMX 3-546-005P Work Holding Center

Toolmex 3-546-005P Dead Center With Nut Carbide Tipped Mt5 T.I.R. 0.0002In, TMX 3-546-005P Work Holding Center

Part Number: TOO3-546-005P
$186.36
Picture of Hard Master Jaws, 10 inch, for 4-Jaw Independent Chucks, 1 Piece, TMX

Hard Master Jaws, 10 inch, for 4-Jaw Independent Chucks, 1 Piece, TMX

Part Number: TOO3-890-310P
$186.26
Loading more products…