Picture of Tool-Flo TMIA4419I/E ZS3 Thread Milling Insert AlTiN 19.00TPI
Picture of Tool-Flo TMIA4419I/E ZS3 Thread Milling Insert AlTiN 19.00TPI
Picture of Tool-Flo TMIA4419I/E ZS3 Thread Milling Insert AlTiN 19.00TPI

Tool-Flo TMIA4419I/E ZS3 Thread Milling Insert AlTiN 19.00TPI

Part Number: TOOTMIA8519I/EZS3B

Need Assistance or Service? Please call 262-251-4020

Manufacturers: TOOL-FLO , TOOL-FLO
SKU: 1295373
Vendor: Sussex Tool and Supply
$36.84
This product has a minimum quantity of 2
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Cutter Type Mill Thread, Mill Thread
Inter Or Extern Int / Ext, Int / Ext
Performance Rating High Performance, High Performance
Overall Length 0.7500 19.05MM- 3/4, 0.7500 19.05MM- 3/4
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools, Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.7500 19.05MM, 0.7500 19.05MM
Type of Tool Indexable Thread Mill, Indexable Thread Mill
Grade ZS3, ZS3
Shipping State TEXAS, TEXAS
Family Group TC-Series, TC-Series
Cutting Edge Material Carbide, Carbide
Coating AlTiN, AlTiN
Made In USA YES, YES
Thread Pitch 19.00TPI, 19.00TPI
Only registered users can write reviews