Picture of Tip 4P11-BSPT IC08 Iscar 6403438 Groove Threading,Threading Insert 0.0110 0.28mm Radius 11.00TPI BSPT

Tip 4P11-BSPT IC08 Iscar 6403438 Groove Threading,Threading Insert 0.0110 0.28mm Radius 11.00TPI BSPT

Part Number: ISC6403438

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1025859
Vendor: Sussex Tool and Supply
$36.60
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Neutral
Insert Application General Purpose
Cutter Type Insert
Inter Or Extern Int / Ext
Insert Size (IC) 2
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style CUT GRIP
Grade IC08
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Dog Bone
Shipping State TEXAS
Family Group Cut-Grip
Cutting Edge Material Carbide
Corner Radius 0.0110 0.28MM
Thread Teeth 1
Full or Partial Profile Full Profile
Thread Type BSPT
Made In USA No
Insert Type Or Orientation Clamp Down
Thread Pitch 11.00TPI
Only registered users can write reviews