Picture of STM 170654 15/32" Car. Job Len Drill

STM 170654 15/32" Car. Job Len Drill

Part Number: SOW170654

Need Assistance or Service? Please call 262-251-4020

Manufacturer: STM
SKU: 1403963
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Right Hand
Shank Or Pilot Diameter 0.4688 11.91MM - 15/32
Cutter Type Carbide Drill
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Hole Making
Included Angle 118°
Shipping State Ontario
Cutting Edge Material Carbide
Tool Material Carbide
Coating Uncoated
Tool Diameter 0.4688 11.91MM - 15/32
Coolant Thru Non Coolant
Drill Length Type Jobber
Flute Type Spiral
Made In USA No
Only registered users can write reviews