Picture of STM 141680 Stm E10 Grade C5 Threading Style "E" Brazed Tool

STM 141680 Stm E10 Grade C5 Threading Style "E" Brazed Tool

Part Number: SOW141680

Need Assistance or Service? Please call 262-251-4020

Manufacturer: STM
SKU: 1407235
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Neutral
Cutter Type Square Brazed Blank
Product Type Square
Overall Length 4.0000 101.60MM
Tool Width 0.6250
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Square Tool Bit
Grade UnCoated
Shipping State Ontario
Cutting Edge Material Carbide C5
Tool Material Carbide C5
Made In USA No
Height H 0.625
Only registered users can write reviews