Picture of STM 141664 Stm D7 Grade C5 Chamfering Style "D" Brazed Tool

STM 141664 Stm D7 Grade C5 Chamfering Style "D" Brazed Tool

Part Number: SOW141664

Need Assistance or Service? Please call 262-251-4020

Manufacturer: STM
SKU: 1407227
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Neutral
Cutter Type Brazed Square
Overall Length 3.0000 76.20MM
Tool Width 0.4375
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Raw Material
Grade UnCoated
Shipping State Ontario
Cutting Edge Material Carbide C5
Tool Material Carbide C5
Made In USA No
Height H 0.4375
Only registered users can write reviews