Picture of STM 121523 3/4" 90º 6-Flute D.E. Carbide Countersink

STM 121523 3/4" 90º 6-Flute D.E. Carbide Countersink

Part Number: SOW121523

Need Assistance or Service? Please call 262-251-4020

Manufacturer: STM
SKU: 1398896
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Cutter Type Countersink
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Hole Making
Included Angle 90°
Flutes Or Inserts 6
Shipping State Ontario
Cutting Edge Material Carbide
Tool Material Carbide
Coating Uncoated
Tool Diameter 0.7500 19.05MM - 3/4
Made In USA No
Only registered users can write reviews