Picture of STM 115957 Letter U Car. Tipped Job Len HSS Drill

STM 115957 Letter U Car. Tipped Job Len HSS Drill

Part Number: SOW115957

Need Assistance or Service? Please call 262-251-4020

Manufacturer: STM
SKU: 1402779
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Right Hand
Shank Or Pilot Diameter 0.3680 9.35MM - U
Cutter Type Carbide Tip Drill
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Hole Making
Included Angle 118°
Shipping State Ontario
Cutting Edge Material CarbideTipped
Tool Material Carbide Tipped
Coating Uncoated
Tool Diameter 0.3680 9.35MM - U
Coolant Thru Non Coolant
Drill Length Type Jobber
Flute Type Spiral
Made In USA No
Only registered users can write reviews