Picture of SCIL 22-MTL007 IC1008 Iscar 6405439 Groove Threading,Threading Insert 0.0030 0.08mm Radius 23.00TPI - 36.00TPI UN

SCIL 22-MTL007 IC1008 Iscar 6405439 Groove Threading,Threading Insert 0.0030 0.08mm Radius 23.00TPI - 36.00TPI UN

Part Number: ISC6405439

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1025898
Vendor: Sussex Tool and Supply
$53.50
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Left Hand
Insert Application General Purpose
Cutter Type Insert
Inter Or Extern Internal
Insert Size (IC) 22
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style ISO
Grade IC1008
Insert Or Tool INSERT
Swiss Or Multi Spindle SWISS
Insert Shape Or Cutter Pocket Shape Other
Shipping State TEXAS
Family Group Swisscut
Cutting Edge Material Carbide
Coating TiAIN + TiN
Corner Radius 0.0030 0.08MM
Thread Teeth 1
Full or Partial Profile Partial Profile
Thread Type UN
Made In USA No
Insert Type Or Orientation Screw Down
Thread Pitch 23.00TPI - 36.00TPI
Only registered users can write reviews