Picture of QD-RH-0400-0502-CM 1135 Sandvik 6398217 Cut Off,Grooving Insert 0.1570 3.99mm Wide 0.0080 0.20mm Radius

QD-RH-0400-0502-CM 1135 Sandvik 6398217 Cut Off,Grooving Insert 0.1570 3.99mm Wide 0.0080 0.20mm Radius

Part Number: SAN6398217

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SANDVIK
SKU: 1088854
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Right Hand
Insert Application General Purpose
Cutter Type Insert
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style QD
Grade 1135
Cutting Width 0.1570 3.99MM
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Other
Shipping State ILLINOIS
Cutting Edge Material Carbide
Coating TiCrN + Al2O3 + TiN
Corner Radius 0.0080 0.20MM
Chamfer Angle 5.0°
Made In USA No
Insert Type Or Orientation Press In
Only registered users can write reviews