Picture of PENTA 24-14-W IC908 Iscar 6004694 Groove Threading,Threading Insert 0.0080 0.20mm Radius 14.00TPI Whitworth BSW/BSF/BSP

PENTA 24-14-W IC908 Iscar 6004694 Groove Threading,Threading Insert 0.0080 0.20mm Radius 14.00TPI Whitworth BSW/BSF/BSP

Part Number: ISC6004694

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1025803
Vendor: Sussex Tool and Supply
$61.10
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Neutral
Insert Application General Purpose
Cutter Type Insert
Inter Or Extern Int / Ext
Insert Size (IC) 24
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style PE
Grade IC908
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Pentagonal
Shipping State TEXAS
Family Group Penta-Cut
Cutting Edge Material Carbide
Coating TiAlN
Corner Radius 0.0080 0.20MM
Thread Teeth 1
Full or Partial Profile Full Profile
Thread Type Whitworth BSW/BSF/BSP
Made In USA No
Insert Type Or Orientation Proprietary
Thread Pitch 14.00TPI
Only registered users can write reviews