Picture of Nine X060A90W010R XP9001 Indexable Drill Positive Polished

Nine X060A90W010R XP9001 Indexable Drill Positive Polished

Part Number: EVE24284

Need Assistance or Service? Please call 262-251-4020

Manufacturer: NINE
SKU: 1004478
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

NINE drill with XP9001 grade polished coating. Coating is polished. Grade is XP9001. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: Polished
  • Grade: XP9001

Grades & Coatings

  • Alternate Description: NINE X060A90W010R XP9001 Indexable Drill Positive Polished X060A90W010R XP9001 X060A90W010R XP9001 XP9001

Other Details

  • Brand: NINE
  • Shipping State: ILLINOIS
  • Made In Usa: No

Technical Overview

What It Does

Indexable Drill performs drilling with positive polished edge.

Composition

XP9001 grade, polished coating.

Typical Uses

Drilling operations in settings using NINE X060A90W010R model.

Products specifications
Attribute name Attribute value
Shipping State ILLINOIS
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating Polished
Insert Or Tool Insert
Insert Application General Purpose
Corner Radius 0.0008 0.02MM
Insert Style XO
Insert Type Positive
Insert Size (IC) 6
Grade XP9001
Cut Diameter Min 0.0040 0.10MM
Drill Type Indexable Drill
Depth Of Cut Max 0.0200
Type Indexable Drill Spot Drill
Cut Diameter Max 0.0430 1.09MM
Chamfer Angle 90.0°
Only registered users can write reviews