Picture of Melin H7753 Dia 1/2 SH 0.50 LOC 0.3640 OAL3.00Chamfer Mill Carbide AlTiN Single End Cham Mill

Melin H7753 Dia 1/2 SH 0.50 LOC 0.3640 OAL3.00Chamfer Mill Carbide AlTiN Single End Cham Mill

Part Number: MELH7753

Need Assistance or Service? Please call 262-251-4020

Manufacturer: MELIN
SKU: 1263926
Vendor: Sussex Tool and Supply
$101.17
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.5000 12.70MM - 1/2
Cutter Type Chamfer Mill
Length Type STANDARD
Performance Rating General Performance
Center Cutting Non Center Cutting
Overall Length 3.0000 76.20MM
Machine Side (Toolpost) CYLINDRICAL0.5000
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.3640 9.25MM
End Of Tool Shape Chamfer
Cutter Style Chamfer Mill
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 3
Shipping State CALIFORNIA, OHIO
Family Group Melin
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.5000 12.70MM - 1/2
Coating AlTiN
Tool Diameter 0.5000 12.70MM - 1/2
Coolant Thru Non Coolant
Chamfer Angle 60.0°
Helix Angle 30°
Made In USA YES
Only registered users can write reviews