Picture of Melin 53370 Dia 1.20mm SH 0.1181 LOC 0.2756 OAL1.496Drill/Mill Carbide AlTiN Single End Drill Point

Melin 53370 Dia 1.20mm SH 0.1181 LOC 0.2756 OAL1.496Drill/Mill Carbide AlTiN Single End Drill Point

Part Number: MEL53370

Need Assistance or Service? Please call 262-251-4020

Manufacturer: MELIN
SKU: 1181947
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.1181 3.00MM
Cutter Type End Mill, Drill Mill
Length Type STANDARD
Performance Rating General Performance
Center Cutting Center Cutting
Overall Length 1.4961 38.00MM
Machine Side (Toolpost) CYLINDRICAL0.1181
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.2756 7.00MM
Type of Tool Drill Mill
End Of Tool Shape Drill Point
Cutter Style Carbide Drill/Mill
Inch Or Metric Metric
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 2
Shipping State CALIFORNIA, OHIO
Family Group Melin
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.1181 3.00MM
Coating AlTiN
Tool Diameter 0.0472 1.20MM
Coolant Thru Non Coolant
Helix Angle 30°
Made In USA YES
Only registered users can write reviews