Picture of Melin 13593 Dia 5/16 Sh 0.3125 Loc 0.8125 Oal2.50 End Mill Standard Flute Standard Helix Carbide Dlc Single End Square Sharp

Melin 13593 Dia 5/16 Sh 0.3125 Loc 0.8125 Oal2.50 End Mill Standard Flute Standard Helix Carbide Dlc Single End Square Sharp

Part Number: MEL13593

Need Assistance or Service? Please call 262-251-4020

Manufacturer: MELIN
SKU: 1002717
Vendor: Sussex Tool and Supply
$0.00

Melin end mill with carbide tool material DLC coating. Cylindrical connection 0.3125 shank. 0.8125 location 2.50 oal standard helix square sharp flute.

Key Details

Materials & Finish

  • Coating: DLC
  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.3125

Grades & Coatings

  • Alternate Description: MELIN Standard Helix End Mill Carbide DLC Square Sharp Standard Flute Flutes 2 Single End MELIN

Other Details

  • Brand: MELIN
  • Shipping State: OHIO,CALIFORNIA
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with standard flute and helix. Designed for standard toolpost connection. Used in machining operations with carbide tip.

Composition

Carbide, DLC coating, cylindrical connection, 0.3125 diameter, 0.8125 length, 2.50 OAL.

Typical Uses

Machining with standard helix end mill. Fits toolpost with cylindrical connection. Used in standard flute operations.

Products specifications
Attribute name Attribute value
Shipping State OHIO, CALIFORNIA
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.3125
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 2.5000 63.50MM
Shank Or Pilot Diameter 0.3125 7.93MM - 5/16
Family Group Melin
Coolant Thru Non Coolant
Coating DLC
Mach Side Connection Size 0.3125 7.94MM - 5/16
Tool Diameter 0.3125 7.94MM - 5/16
Flutes Or Inserts 2
Length Type Standard
Performance Rating General Performance
Length Of Cut 0.8125 20.64MM
End Of Tool Shape Square
Cutter Style Carbide Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 30°
Center Cutting Center Cutting
Only registered users can write reviews