Picture of Melin 13019 Dia 1-1/4 SH 1.2500 LOC 2.00 OAL4.50 End Mill Standard Flute Standard Helix Powder Metal nACRoA Single End Corner Radius0.0300 0.76mm - 0.0350 0.89mm

Melin 13019 Dia 1-1/4 SH 1.2500 LOC 2.00 OAL4.50 End Mill Standard Flute Standard Helix Powder Metal nACRoA Single End Corner Radius0.0300 0.76mm - 0.0350 0.89mm

Part Number: MEL13019

Need Assistance or Service? Please call 262-251-4020

Manufacturer: MELIN
SKU: 1135258
Vendor: Sussex Tool and Supply
$0.00
The abbreviation PM in HSS-PM does not refer to the alloying constituents of the high speed steel, but to the method of manufacture. The liquid steel melt is atomized by means of nitrogen. The powder is then hot isostatically pressed (so-called HIP process) and then brought into the respective shape by forging and rolling as in conventional steel production. The advantages of steel result from the more uniform and finer carbide distribution (carbide = hard materials in steel). This makes the material easier to machine. In application, however, it is still wear-resistant and has a high hot hardness.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 1.2500 31.75MM - 1-1/4
Cutter Type Solid End Mill
Length Type STANDARD
Performance Rating General Performance
Center Cutting Center Cutting
Overall Length 4.5000 114.30MM
Machine Side (Toolpost) WELDON1.2500
Cutting Edge Definition The abbreviation PM in HSS-PM does not refer to the alloying constituents of the high speed steel, it is still wear-resistant and has a high hot hardness., but to the method of manufacture. The liquid steel melt is atomized by means of nitrogen. The powder is then hot isostatically pressed (so-called HIP process) and then brought into the respective shape by forging and rolling as in conventional steel production. The advantages of steel result from the more uniform and finer carbide distribution (carbide = hard materials in steel). This makes the material easier to machine. In application, however
Length Of Cut 2.0000 50.80MM
Type of Tool End Mill
End Of Tool Shape CORNER RADIUS
Cutter Style Powder Metal Bull Nose Finisher
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Weldon
Flutes Or Inserts 4
Shipping State CALIFORNIA, OHIO
Family Group Melin
Single Or Double End Single End
Cutting Edge Material Powder Metal
Tool Material Powder Metal
Mach Side Connection Size 1.2500 31.75MM - 1-1/4
Coating nACRoA
Tool Diameter 1.2500 31.75MM - 1-1/4
Coolant Thru Non Coolant
Corner Radius 0.0300 0.76MM - 0.0350 0.89MM
Helix Angle 30°
Made In USA YES
Only registered users can write reviews