MAHR

Sort by
Picture of Mahr 5009032 Bushing With Wiper Seals N570/100/112/140/250

Mahr 5009032 Bushing With Wiper Seals N570/100/112/140/250

Part Number: MAH5009032
$1,750.00
Picture of Mahr 2121465 830M Amp, Mahr, High Mag-Inch (Same Ranges As 2121424)

Mahr 2121465 830M Amp, Mahr, High Mag-Inch (Same Ranges As 2121424)

Part Number: MAH2121465
$1,750.00
Picture of Mahr Kp-129 Thickness Gage, .001" Grads, 1.0" Range, 12" Gaging Length

Mahr Kp-129 Thickness Gage, .001" Grads, 1.0" Range, 12" Gaging Length

Part Number: MAHKP-129
$1,750.00
Picture of Mahr Kp-129M Thickness Gage .020 mm Grads, 25mm Range,305mm Gaging Length

Mahr Kp-129M Thickness Gage .020 mm Grads, 25mm Range,305mm Gaging Length

Part Number: MAHKP-129M
$1,750.00
Picture of Mahr 4426810 P1514 H, Probe, For 817 Clm Only

Mahr 4426810 P1514 H, Probe, For 817 Clm Only

Part Number: MAH4426810
$1,750.00
Picture of Mahr 9057488 Lp C 30-15-2/60° Probe Arm

Mahr 9057488 Lp C 30-15-2/60° Probe Arm

Part Number: MAH9057488
$1,750.00
Picture of Mahr Kp-102M Thickness Gage, .010 mm Grads, 2.5mm Range,102mm Gaging Depth

Mahr Kp-102M Thickness Gage, .010 mm Grads, 2.5mm Range,102mm Gaging Depth

Part Number: MAHKP-102M
$1,750.00
Picture of Mahr Kp-102 Thickness Gage, .0005" Grads, .125" Range, 4" Gaging Depth

Mahr Kp-102 Thickness Gage, .0005" Grads, .125" Range, 4" Gaging Depth

Part Number: MAHKP-102
$1,750.00
Picture of Mahr 9043025 Ld C 34-20-5/60

Mahr 9043025 Ld C 34-20-5/60

Part Number: MAH9043025
$1,750.00
Picture of Mahr 5360565 Calibration Disk 100 mm Dia.

Mahr 5360565 Calibration Disk 100 mm Dia.

Part Number: MAH5360565
$1,750.00
Picture of Mahr W-44106 Bore Gage, 1280P-3W2, With A W-40347

Mahr W-44106 Bore Gage, 1280P-3W2, With A W-40347

Part Number: MAHW-44106
$1,750.00
Picture of Mahr 2051809Kal Snap Gage, Meas. 1-2", Maxum Ind., Lift Lever W/Cal

Mahr 2051809Kal Snap Gage, Meas. 1-2", Maxum Ind., Lift Lever W/Cal

Part Number: MAH2051809KAL
$1,748.00