MAHR

Sort by
Picture of Mahr 2059461 Thickness Gage, 57B-15, D8Is Ind, 3.4 Psi Tdl

Mahr 2059461 Thickness Gage, 57B-15, D8Is Ind, 3.4 Psi Tdl

Part Number: MAH2059461
$2,030.00
Picture of Mahr 2051823Kal Snap Gage, Meas. 2-3", Maxum Ind., Blade Anvil, Lift Lever W/Cal

Mahr 2051823Kal Snap Gage, Meas. 2-3", Maxum Ind., Blade Anvil, Lift Lever W/Cal

Part Number: MAH2051823KAL
$2,030.00
Picture of Mahr 2060882 Thickness Gage, 57B-15, .375" Anvil & 2.5 Oz Tdl

Mahr 2060882 Thickness Gage, 57B-15, .375" Anvil & 2.5 Oz Tdl

Part Number: MAH2060882
$2,030.00
Picture of Mahr 2059385 Thickness Gage, 57B-15, 3.3 Oz (93.5 Gm) Tdl, Ind. #2015490

Mahr 2059385 Thickness Gage, 57B-15, 3.3 Oz (93.5 Gm) Tdl, Ind. #2015490

Part Number: MAH2059385
$2,030.00
Picture of Mahr 2099193 Dr50-Cs2M-29.980-1, Air Ring, .156"Jc, 2.5"C'Bore, Ferro-Tic

Mahr 2099193 Dr50-Cs2M-29.980-1, Air Ring, .156"Jc, 2.5"C'Bore, Ferro-Tic

Part Number: MAH2099193
$2,030.00
Picture of Mahr 7033927 Rotary Encoder For Plm600

Mahr 7033927 Rotary Encoder For Plm600

Part Number: MAH7033927
$2,030.00
Picture of Mahr 6351583 Sw-Op Marsurf Mfm Fft&Wavelet Module

Mahr 6351583 Sw-Op Marsurf Mfm Fft&Wavelet Module

Part Number: MAH6351583
$2,030.00
Picture of Mahr 2051769Kal Snap Gage, Meas. 5-6", Maxum Ind. W/Cal

Mahr 2051769Kal Snap Gage, Meas. 5-6", Maxum Ind. W/Cal

Part Number: MAH2051769KAL
$2,029.00
Picture of Mahr Omi-301P-11Kal Lever, Snap Gage, Less Ind

Mahr Omi-301P-11Kal Lever, Snap Gage, Less Ind

Part Number: MAHOMI-301P-11KAL
$2,025.00
Picture of Mahr 2064111Kal Snap Gage, M301P-11, 8mm Adapt 10-11", No Ind, W/Lift Lever

Mahr 2064111Kal Snap Gage, M301P-11, 8mm Adapt 10-11", No Ind, W/Lift Lever

Part Number: MAH2064111KAL
$2,025.00
Picture of Mahr 5318400Kal Column, 1840M Mahr Inductive, Use With 'Mahr' Type Probes W/Cal

Mahr 5318400Kal Column, 1840M Mahr Inductive, Use With 'Mahr' Type Probes W/Cal

Part Number: MAH5318400KAL
$2,024.90
Picture of Mahr 4478220Kal 844 Dk Measuring Head Standard * Size/Tol Specified On Cop W/Cal

Mahr 4478220Kal 844 Dk Measuring Head Standard * Size/Tol Specified On Cop W/Cal

Part Number: MAH4478220KAL
$2,022.70