Picture of MACL 3 070-R 1025 Sandvik 5733335 Cut Off,Grooving Insert 0.0280 0.71mm Wide 0.0020 0.05mm Radius

MACL 3 070-R 1025 Sandvik 5733335 Cut Off,Grooving Insert 0.0280 0.71mm Wide 0.0020 0.05mm Radius

Part Number: SAN5733335

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SANDVIK
SKU: 1088830
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Left Hand
Insert Application General Purpose
Cutter Type Insert
Depth Of Cut Max 0.1690
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style MA
Grade 1025
Cutting Width 0.0280 0.71MM
Insert Or Tool INSERT
Swiss Or Multi Spindle SWISS
Insert Shape Or Cutter Pocket Shape Other
Shipping State ILLINOIS
Cutting Edge Material Carbide
Coating TiAIN + TiN
Corner Radius 0.0020 0.05MM
Chamfer Angle 15.0°
Made In USA No
Insert Type Or Orientation On Edge
Only registered users can write reviews