Picture of M.A. Ford 33450020R.030GPCS Dia 1/2 SH 0.50 LOC 1.2500 OAL3.00 End Mill Carbide Gem Plus Single End Corner Radius0.0300 0.76mm TuffCut® XR-AL

M.A. Ford 33450020R.030GPCS Dia 1/2 SH 0.50 LOC 1.2500 OAL3.00 End Mill Carbide Gem Plus Single End Corner Radius0.0300 0.76mm TuffCut® XR-AL

Part Number: MAF16614

Need Assistance or Service? Please call 262-251-4020

Manufacturer: M.A. FORD
SKU: 1243879
Vendor: Sussex Tool and Supply
$174.88
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.5000 12.70MM - 1/2
Cutter Type Solid End Mill
Length Type STANDARD
Performance Rating High Performance
Center Cutting Center Cutting
Overall Length 3.0000 76.20MM
Machine Side (Toolpost) CYLINDRICAL0.5000
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 1.2500 31.75MM
End Of Tool Shape CORNER RADIUS
Cutter Style Carbide Finish Chip Break
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 3
Shipping State IOWA
Family Group TuffCut® XR-AL
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.5000 12.70MM - 1/2
Coating Gem Plus
Tool Diameter 0.5000 12.70MM - 1/2
Coolant Thru Non Coolant
Corner Radius 0.0300 0.76MM
Helix Angle 45°
Made In USA YES
Only registered users can write reviews