Picture of M.A. Ford 18010006Bw Dia 1 Sh 1.00 Loc 1.00 Oal4.00 End Mill Standard Flute Standard Helix Carbide Altin Single End Corner Radius0.0600 1.52mm Tuffcut® Xr7

M.A. Ford 18010006Bw Dia 1 Sh 1.00 Loc 1.00 Oal4.00 End Mill Standard Flute Standard Helix Carbide Altin Single End Corner Radius0.0600 1.52mm Tuffcut® Xr7

Part Number: MAF17060

Need Assistance or Service? Please call 262-251-4020

Manufacturer: M.A. FORD
SKU: 1003006
Vendor: Sussex Tool and Supply
$506.48

M.A. FORD carbide end mill with AlTiN coating. Standard flute, standard helix, corner radius 0.0600 1.52mm. Weldon 1.0000 connection. Made in USA.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Weldon
  • Machine Side (Toolpost): WELDON1.0000

Grades & Coatings

  • Alternate Description: M.A. FORD 18010006BW Standard Helix End Mill Carbide AlTiN Corner Radius 0.0600 1.52MM Standard Flute Flutes 7 Single End TuffCut® XR7

Other Details

  • Brand: M.A. FORD
  • Shipping State: IOWA
  • Made In Usa: Yes
  • Type Of Tool: End Mill

Technical Overview

What It Does

Cuts material with standard helix and flute. Performs corner cutting with 0.0600 radius. Suitable for standard end mill operations.

Composition

Carbide, AlTiN coating, Weldon 1.0000 connection.

Typical Uses

End milling in machine with Weldon toolpost. Used in standard flute operations. Fits standard helix cutting tasks.

Products specifications
Attribute name Attribute value
Shipping State IOWA
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) WELDON1.0000
Machine Side (Toolpost) Connection Type Weldon
Overall Length 4.0000 101.60MM
Shank Or Pilot Diameter 1.0000 25.40MM
Family Group TuffCut® XR7
Coolant Thru Non Coolant
Coating AlTiN
Mach Side Connection Size 1.0000 25.40MM
Tool Diameter 1.0000 25.40MM
Flutes Or Inserts 7
Type of Tool End Mill
Length Type Standard
Performance Rating High Performance
Length Of Cut 1.0000 25.40MM
End Of Tool Shape Corner Radius
Cutter Style Carbide Bull Nose Finisher
Single Or Double End Single End
Corner Radius 0.0600 1.52MM
Inch Or Metric Inch
Helix Angle 38°
Center Cutting Center Cutting
Only registered users can write reviews