Picture of M.A. Ford 15601560A Dia 1/64 Sh 0.2500 Loc 0.0156 Oal2.50 End Mill Standard Flute Standard Helix Carbide Altin Single End Ball Noseball Tuffcut Dm®

M.A. Ford 15601560A Dia 1/64 Sh 0.2500 Loc 0.0156 Oal2.50 End Mill Standard Flute Standard Helix Carbide Altin Single End Ball Noseball Tuffcut Dm®

Part Number: MAF15600

Need Assistance or Service? Please call 262-251-4020

Manufacturer: M.A. FORD
SKU: 1002879
Vendor: Sussex Tool and Supply
$83.93

M.A. FORD 15601560A carbide end mill with ball nose flute standard helix AlTiN coating cylindrical connection made in USA.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.2500

Grades & Coatings

  • Alternate Description: M.A. FORD 15601560A Standard Helix End Mill Carbide AlTiN Ball Nose Ball Standard Flute Flutes 2 Single End TuffCut DM®

Other Details

  • Brand: M.A. FORD
  • Shipping State: IOWA
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with standard flute and helix. Designed for ball nose end milling. Used in standard toolpost setups.

Composition

Carbide, AlTiN coating, cylindrical connection.

Typical Uses

End milling, ball nose cutting, standard flute operations in machine toolpost.

Products specifications
Attribute name Attribute value
Shipping State IOWA
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.2500
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 2.5000 63.50MM
Shank Or Pilot Diameter 0.2500 6.35MM - 1/4 - E
Family Group TuffCut DM®
Coolant Thru Non Coolant
Coating AlTiN
Mach Side Connection Size 0.2500 6.35MM - 1/4 - E
Tool Diameter 0.0156 0.40MM - 1/64
Flutes Or Inserts 2
Length Type Standard
Performance Rating High Performance
Length Of Cut 0.0156 0.40MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 20°
Center Cutting Center Cutting
Only registered users can write reviews