Picture of M.A. Ford 14011810A Dia 3mm Sh 0.1181 Loc 0.4724 Oal1.4961 End Mill Standard Flute Standard Helix Carbide Altin Single End Ball Noseball Tuffcut® Gp

M.A. Ford 14011810A Dia 3mm Sh 0.1181 Loc 0.4724 Oal1.4961 End Mill Standard Flute Standard Helix Carbide Altin Single End Ball Noseball Tuffcut® Gp

Part Number: MAF14000

Need Assistance or Service? Please call 262-251-4020

Manufacturer: M.A. FORD
SKU: 1001846
Vendor: Sussex Tool and Supply
$30.19

M.A. FORD 14011810A standard helix end mill, carbide, AlTiN coating. Flutes 4, cylindrical toolpost connection. Made in USA, shipping state IOWA. Tool material carbide, machine side cylindrical.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.1181

Grades & Coatings

  • Alternate Description: M.A. FORD 14011810A Standard Helix End Mill Carbide AlTiN Ball Nose Ball Standard Flute Flutes 4 Single End TuffCut® GP

Other Details

  • Brand: M.A. FORD
  • Shipping State: IOWA
  • Made In Usa: Yes
  • Type Of Tool: End Mill

Technical Overview

What It Does

Cuts material with standard helix and ball nose design. Performs standard flute operations. Suitable for single end use in machining tasks.

Composition

Carbide tool material with AlTiN coating. Cylindrical connection size 0.1181. Made in USA.

Typical Uses

Used in end milling operations. Applied in standard flute cutting. Fits machine toolpost with cylindrical connection.

Products specifications
Attribute name Attribute value
Shipping State IOWA
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.1181
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 1.4961 38.00MM
Shank Or Pilot Diameter 0.1181 3.00MM
Family Group TuffCut® GP
Coolant Thru Non Coolant
Coating AlTiN
Mach Side Connection Size 0.1181 3.00MM
Tool Diameter 0.1181 3.00MM
Flutes Or Inserts 4
Type of Tool End Mill
Length Type Standard
Performance Rating General Performance
Length Of Cut 0.4724 12.00MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Single Or Double End Single End
Inch Or Metric Metric
Helix Angle 30°
Center Cutting Center Cutting
Only registered users can write reviews