Picture of M.A. Ford 135B6299N3 Dia 16mm SH 0.6299 LOC 0.7874 OAL3.5039 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball NoseBall TuffCut® AL

M.A. Ford 135B6299N3 Dia 16mm SH 0.6299 LOC 0.7874 OAL3.5039 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball NoseBall TuffCut® AL

Part Number: MAF13250

Need Assistance or Service? Please call 262-251-4020

Manufacturer: M.A. FORD
SKU: 1135659
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.6299 16.00MM
Cutter Type Solid End Mill
Length Type Standard / With Neck
Performance Rating High Performance
Center Cutting Center Cutting
Overall Length 3.5039 89.00MM
Machine Side (Toolpost) CYLINDRICAL0.6299
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.7874 20.00MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Inch Or Metric Metric
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 2
Shipping State IOWA
Family Group TUFFCUT® AL
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.6299 16.00MM
Tool Diameter 0.6299 16.00MM
Coolant Thru Non Coolant
Neck Length 1.9685 50.00MM
Helix Angle 37°
Made In USA YES
Only registered users can write reviews