Picture of Link T5-TL-095 4ST Type DED Powder Metal T-15 HSS CenterDrill, TIALN COAT

Link T5-TL-095 4ST Type DED Powder Metal T-15 HSS CenterDrill, TIALN COAT

Part Number: LINT5-TL-095

Need Assistance or Service? Please call 262-251-4020

Manufacturer: LINK
SKU: 1113605
Vendor: Sussex Tool and Supply
$39.07
The abbreviation PM in HSS-PM does not refer to the alloying constituents of the high speed steel, but to the method of manufacture. The liquid steel melt is atomized by means of nitrogen. The powder is then hot isostatically pressed (so-called HIP process) and then brought into the respective shape by forging and rolling as in conventional steel production. The advantages of steel result from the more uniform and finer carbide distribution (carbide = hard materials in steel). This makes the material easier to machine. In application, however, it is still wear-resistant and has a high hot hardness.
Products specifications
Attribute name Attribute value
Cutter Type Center Drill
Cutting Edge Definition The abbreviation PM in HSS-PM does not refer to the alloying constituents of the high speed steel, it is still wear-resistant and has a high hot hardness., but to the method of manufacture. The liquid steel melt is atomized by means of nitrogen. The powder is then hot isostatically pressed (so-called HIP process) and then brought into the respective shape by forging and rolling as in conventional steel production. The advantages of steel result from the more uniform and finer carbide distribution (carbide = hard materials in steel). This makes the material easier to machine. In application, however
Type of Tool Drill
Included Angle 60°
Flutes Or Inserts 2
Shipping State MICHIGAN
Family Group Link
Cutting Edge Material Powder Metal
Tool Material Powder Metal
Coating TiAlN
Tool Diameter 0.2090 5.31MM - #4
Cut Diameter Min 0.2090 5.30MM - #4
Made In USA YES
Only registered users can write reviews