Picture of Link CB-TN-097 6-60 Type DED Carbide CenterDrill TIn COAT

Link CB-TN-097 6-60 Type DED Carbide CenterDrill TIn COAT

Part Number: LINCB-TN-097

Need Assistance or Service? Please call 262-251-4020

Manufacturer: LINK
SKU: 1114495
Vendor: Sussex Tool and Supply
$101.02
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Cutter Type Center Drill
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Drill
Included Angle 60°
Flutes Or Inserts 2
Shipping State MICHIGAN
Family Group Link
Cutting Edge Material Carbide
Tool Material Carbide
Coating TIN
Tool Diameter 0.2040 5.18MM - #6
Cut Diameter Min 0.2040 5.18MM - #6
Made In USA YES
Only registered users can write reviews