Picture of Link 97-CB-391 1/2 X 4 Carbide 120° NC SPOT Drill

Link 97-CB-391 1/2 X 4 Carbide 120° NC SPOT Drill

Part Number: LIN97-CB-391

Need Assistance or Service? Please call 262-251-4020

Manufacturer: LINK
SKU: 1114565
Vendor: Sussex Tool and Supply
$85.19
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Cutter Type Spot Drill
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Type of Tool Drill
Included Angle 120°
Flutes Or Inserts 2
Shipping State MICHIGAN
Family Group Link
Cutting Edge Material Carbide
Tool Material Carbide
Tool Diameter 0.5000 12.70MM - 1/2
Cut Diameter Min 0.5000 12.70MM - 1/2
Made In USA YES
Only registered users can write reviews