Picture of L151.2-200 20-5F 1125 Sandvik 5734240 Cut Off,Grooving Insert 0.0790 2.01mm Wide 0.0040 0.10mm Radius

L151.2-200 20-5F 1125 Sandvik 5734240 Cut Off,Grooving Insert 0.0790 2.01mm Wide 0.0040 0.10mm Radius

Part Number: SAN5734240

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SANDVIK
SKU: 1087799
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Left Hand
Insert Application General Purpose
Cutter Type Insert
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style L151
Grade 1125
Cutting Width 0.0790 2.01MM
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Other
Shipping State ILLINOIS
Cutting Edge Material Carbide
Coating TiAlN
Corner Radius 0.0040 0.10MM
Chamfer Angle 20.0°
Made In USA No
Insert Type Or Orientation Press In
Only registered users can write reviews