Picture of Iscar SD D1.50-H375D-SP17 IC908 Dia 37.80mm SH 0.6693 LOC 0.3930 OAL0.39T-Slot,Replacable Head Carbide TiAlN Single End 0.0160 0.41mm T-Slot

Iscar SD D1.50-H375D-SP17 IC908 Dia 37.80mm SH 0.6693 LOC 0.3930 OAL0.39T-Slot,Replacable Head Carbide TiAlN Single End 0.0160 0.41mm T-Slot

Part Number: ISC3311779

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1181963
Vendor: Sussex Tool and Supply
$264.50
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.6700 17.02MM
Cutter Type Screw On Head, T-Slot
Length Type STANDARD
Performance Rating High Performance
Center Cutting Non Center Cutting
Overall Length 0.3930 9.98MM
Machine Side (Toolpost) SP17
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.3930 9.98MM
Cutter Style Screw On T-Slot
Inch Or Metric Inch
Cutting Width 0.3750 9.53MM
Machine Side (Toolpost) Connection Type SP
Flutes Or Inserts 10
Shipping State TEXAS
Family Group T-Slot
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.6693 17.00MM
Coating TiAlN
Tool Diameter 1.4880 37.80MM
Coolant Thru Non Coolant
Corner Radius 0.0160 0.41MM
Chamfer Angle 90.0°
Made In USA No
Only registered users can write reviews