Picture of Iscar SD D1.25-H078A-SP15 IC908 Dia 1.238 SH 0.5906 OAL0.3150T-Slot,Replacable Head Carbide TiAlN Single End 0.0080 0.20mm T-Slot

Iscar SD D1.25-H078A-SP15 IC908 Dia 1.238 SH 0.5906 OAL0.3150T-Slot,Replacable Head Carbide TiAlN Single End 0.0080 0.20mm T-Slot

Part Number: ISC5607643

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1181921
Vendor: Sussex Tool and Supply
$172.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.5910 15.01MM
Cutter Type Screw On Head, T-Slot
Length Type STANDARD
Performance Rating High Performance
Center Cutting Non Center Cutting
Overall Length 0.3150 8.00MM
Machine Side (Toolpost) SP15
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Cutter Style Screw On T-Slot
Inch Or Metric Inch
Cutting Width 0.0780 1.98MM
Machine Side (Toolpost) Connection Type SP
Flutes Or Inserts 8
Shipping State TEXAS
Family Group T-Slot
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.5906 15.00MM
Coating TiAlN
Tool Diameter 1.2380 31.45MM
Coolant Thru Non Coolant
Corner Radius 0.0080 0.20MM
Chamfer Angle 90.0°
Made In USA No
Only registered users can write reviews