Picture of Iscar MM TS.625-H125D-06T06 IC328 Dia 5/8 SH T06T-Slot,Replacable Head Carbide TiCN Single End 0.0160 0.41mm MULTI-Master

Iscar MM TS.625-H125D-06T06 IC328 Dia 5/8 SH T06T-Slot,Replacable Head Carbide TiCN Single End 0.0160 0.41mm MULTI-Master

Part Number: ISC5603174

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1189494
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter T06
Cutter Type Screw On Head, T-Slot
Length Type STANDARD
Performance Rating High Performance
Center Cutting Non Center Cutting
Machine Side (Toolpost) T06
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Cutter Style Screw On T-Slot
Inch Or Metric Inch
Cutting Width 0.1250 3.18MM
Machine Side (Toolpost) Connection Type Screw On
Flutes Or Inserts 6
Shipping State TEXAS
Family Group Multi-Master
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size T06
Coating TICN
Tool Diameter 0.6250 15.88MM - 5/8
Coolant Thru Non Coolant
Corner Radius 0.0160 0.41MM
Chamfer Angle 90.0°
Made In USA No
Only registered users can write reviews