Picture of Iscar MM HC.500C55R016-2T08 IC908 Dia 1/2 SH T08 LOC 0.4330 OAL0.9130Screw On Head Carbide TiAlN Single End Drill Point0.0160 0.41mm MULTI-Master

Iscar MM HC.500C55R016-2T08 IC908 Dia 1/2 SH T08 LOC 0.4330 OAL0.9130Screw On Head Carbide TiAlN Single End Drill Point0.0160 0.41mm MULTI-Master

Part Number: ISC5603361

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1183407
Vendor: Sussex Tool and Supply
$84.80
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Cutter Type Screw On Head
Length Type STANDARD
Performance Rating High Performance
Center Cutting Center Cutting
Overall Length 0.9130 23.19MM
Machine Side (Toolpost) T08
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.4330 11.00MM
End Of Tool Shape Drill Point
Cutter Style Screw On Carbide Drill/Mill
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Screw On
Flutes Or Inserts 2
Shipping State TEXAS
Family Group Multi-Master
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size T08
Coating TiAlN
Tool Diameter 0.5000 12.70MM - 1/2
Coolant Thru Non Coolant
Corner Radius 0.0160 0.41MM
Chamfer Angle 90.0°
Helix Angle 10°
Made In USA No
Only registered users can write reviews