Picture of Iscar HCCD1.0-R.156-QF IC908 Milling Insert Back Draft 0.156 Corner Radius TiAlN

Iscar HCCD1.0-R.156-QF IC908 Milling Insert Back Draft 0.156 Corner Radius TiAlN

Part Number: ISC5604825

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1010204
Vendor: Sussex Tool and Supply
$104.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application Semi Finishing, Finishing
Cutter Type Insert
Depth Of Cut Max 0.5790
Insert Size (IC) 1
Insert Type Neutral
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style HC
Grade IC908
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Flat Blade
Shipping State TEXAS
Family Group BALLPLUS
Cutting Edge Material Carbide
Insert Fits Back Draft
Coating TiAlN
Corner Radius 0.1560 3.96MM
Made In USA No
Only registered users can write reviews