Picture of Iscar H490ANKX1706R15T-FF IC830 Milling Insert Paralelagram 0.063 Corner Radius AlTiN + TiN

Iscar H490ANKX1706R15T-FF IC830 Milling Insert Paralelagram 0.063 Corner Radius AlTiN + TiN

Part Number: ISC5605989

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1010103
Vendor: Sussex Tool and Supply
$44.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application Roughing, Semi Finishing
Cutter Type Insert
Depth Of Cut Max 0.0790
Insert Size (IC) 17
Insert Type Negative
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style AN
Grade IC830
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Parallelogram
Shipping State TEXAS
Family Group Helido 490 Line
Cutting Edge Material Carbide
Insert Fits Parallelogram
Coating AlTiN + TiN
Corner Radius 0.0630 1.60MM
Made In USA No
Only registered users can write reviews