Picture of Ingersoll 48U-6235TRRB20 IN2005 Dia 5/8 SH T10 LOC 0.3500End Mill,Replacable Head Torus Standard Helix Carbide TiAlN Single End Torus0.2000 5.08mm CHIPSURFER

Ingersoll 48U-6235TRRB20 IN2005 Dia 5/8 SH T10 LOC 0.3500End Mill,Replacable Head Torus Standard Helix Carbide TiAlN Single End Torus0.2000 5.08mm CHIPSURFER

Part Number: ING5840747

Need Assistance or Service? Please call 262-251-4020

Manufacturer: INGERSOLL
SKU: 1181182
Vendor: Sussex Tool and Supply
$233.00
This product has a minimum quantity of 2
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter T10
Cutter Type End Mill Screw On Head
Length Type STANDARD
Performance Rating High Performance
Center Cutting Non Center Cutting
Machine Side (Toolpost) T10
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.3500 8.89MM
End Of Tool Shape Torus
Cutter Style Screw On Corner Radius End Mill
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Screw On
Flutes Or Inserts 6
Shipping State ILLINOIS
Family Group Chip Surfer
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size T10
Coating TiAlN
Tool Diameter 0.6250 15.88MM - 5/8
Coolant Thru Non Coolant
Corner Radius 0.2000 5.08MM
Helix Angle 30°
Made In USA No
Only registered users can write reviews